2nd Light Forums |
Topic Title: sun cure epoxy Topic Summary: thin coat not kicking? Created On: 01/03/2023 02:32 AM |
Linear : Threading : Single : Branch |
- tom | - 01/03/2023 02:32 AM |
- dingpatch | - 01/03/2023 03:36 AM |
- tom | - 01/03/2023 05:54 AM |
- JOESTRUMMER | - 01/03/2023 07:44 AM |
- waterlizard25 | - 01/04/2023 07:39 AM |
- tom | - 01/06/2023 02:48 AM |
- Cole | - 01/07/2023 08:17 PM |
- StirfryMcflurry | - 01/08/2023 10:53 AM |
- tom | - 01/08/2023 11:19 AM |
- Cole | - 01/09/2023 06:32 AM |
- tom | - 01/10/2023 05:32 AM |
- waterlizard25 | - 01/11/2023 01:32 PM |
- JOESTRUMMER | - 01/11/2023 10:23 PM |
- Cole | - 01/12/2023 07:07 AM |
- StirfryMcflurry | - 01/12/2023 10:19 AM |
- waterlizard25 | - 01/12/2023 02:00 PM |
- JOESTRUMMER | - 01/12/2023 03:40 PM |
- StirfryMcflurry | - 01/12/2023 04:01 PM |
- Cole | - 01/13/2023 09:42 AM |
- StirfryMcflurry | - 01/13/2023 11:07 AM |
- Cole | - 01/13/2023 09:41 AM |
- oipaul | - 01/03/2023 08:41 AM |
- CurtisEflush | - 01/03/2023 11:51 AM |
- Cole | - 01/03/2023 03:08 PM |
- LBLarry | - 01/06/2023 02:58 PM |
- fredman | - 01/06/2023 06:10 PM |
- CurtisEflush | - 01/11/2023 08:22 AM |
Topic Tools
|
01/06/2023 06:10 PM
|
|
Tom, did it come with clear plastic sheets, and did you put a clear plastic sheet over it?
If not, in my experience that top layer will not kick. Something about the air/oxygen keeping it from kicking which is why they give you the clear, plastic sheet which shields the goo from the air while the UV allows it to kick.
Packing tape works well in place of the clear plastic sheet -- so, I've heard -- easier to wrap rails and such.
(Not sure why the test bead worked if my theory is correct).
|
|
|
|
FORUMS
:
Surfing
:
sun cure epoxy
|
Topic Tools
|
FuseTalk Basic Edition - © 1999-2024 FuseTalk Inc. All rights reserved.
First there was Air Jordan .