1. 9.75 inch Justin Quintal with a 8.5 inch base. Aspen and Cedar "Flag" glue-up. Clear light blue bead. Rear screw. Glassed with 2 layers of 6 OZ.
SOLD
2. 8 1/8 inch with 5 inch base. Horizontal bamboo glue-up with nice springy flex. Clear light green bead. Front screw. Glassed with 1 layer of 6 OZ.
SOLD
3. For those times when you want to do some Old School Logging, but you can't get your crank back close enough to her tail. Solid Oak "D". 9.5 inches. Cut-a-way in back gets the trailing edge 3.25 inches closer to the tail. Clear green bead is filled with chopped gun roving. Now, the base had to be thinned down so that it would slide easily in the box! May, or may not, wiggle a little! With a front screw the pin is positioned so that it drops in when the front tab is very close to the front of a 10" box. You can ride with it in a more normal position if you like. $35 SOLD
4. 9 inch noserider pivot with a 6 inch base. Sunrise glue-up of Hawaiian Koa and Bamboo. Clear bead. Rear screw. Koa is over 100 years old.
SOLD
5. 8 7/8 inch noserider pivot with a 6 inch base. Sunrise glue-up of Fir and bamboo, with thin strips of veneer separating the fir and bamboo. Transparent blue-green bead. Rear screw.
SOLD
6. 9 3/8 inch Greenough 4A style with a 7 1/2 inch base. "Horizontal" bamboo glue-up has lots of springy flex. Transparent light green bead. Front screw.
SOLD
-------------------------
Dora Hates You
Edited: 07/08/2015
at 03:45 PM
by dingpatch