2nd Light Forums |
Topic Title: Dingpatch fins for Christmas? Topic Summary: Created On: 12/11/2014 12:43 PM |
Linear : Threading : Single : Branch |
Topic Tools
|
12/11/2014 12:43 PM
|
|
1. 9.75 inch Justin Quintal with a 8.5 inch base. Aspen and Cedar "Flag" glue-up. Clear light blue bead. Rear screw. Glassed with 2 layers of 6 OZ. $65
2. 8 1/8 inch with 5 inch base. Horizontal bamboo glue-up with nice springy flex. Clear light green bead. Front screw. Glassed with 1 layer of 6 OZ. $50 3. 7 inch Bonzer with "Horizontal" bamboo glue-up, 5 3/4 inch base. Good, springy, flex. SOLD BUT, , , , I gots more bamboo to make you one too. 4. 8 1/4 inch with a 6 inch base. Big sweep, lots of rake. Front screw. Brazilian Koa, clear bead. Glassed with 2 layers of 6 OZ. 7 inches horizontal from back of base to tip if fin. SOLD 5. For those times when you want to do some Old School Logging, but you can't get your crank back close enough to her tail. Solid Oak "D". 9.5 inches. Cut-a-way in back gets the trailing edge 3.25 inches closer to the tail. Clear green bead is filled with chopped gun roving. Now, the base had to be thinned down so that it would slide easily in the box! May, or may not, wiggle a little! With a front screw the pin is positioned so that it drops in when the front tab is very close to the front of a 10" box. You can ride with it in a more normal position if you like. $45 ------------------------- Dora Hates You Edited: 01/10/2015 at 02:56 PM by dingpatch |
|
|
|
12/15/2014 05:12 AM
|
|
still gots 1, 2, 4 & 5
------------------------- Dora Hates You |
|
|
|
12/19/2014 05:59 AM
|
|
.
------------------------- Dora Hates You |
|
|
|
12/28/2014 05:54 AM
|
|
.
------------------------- Dora Hates You |
|
|
|
12/29/2014 07:56 PM
|
|
Hey Dingpatch, I know I probably already asked you this but anyway I have a 9' Velzy triple stringer 2+1, what size fin for the center fin box would you suggest? Oh, and what's the link for your eBay store? Thanks.
------------------------- Life is a garden*Dig it! |
|
|
|
12/30/2014 05:07 AM
|
|
8 to 9 inch when set-up a a 3 fin, 8.5 to 9.5 when single.
I'm unclehoward on ebay. I also sell on Etsy as dingpatch (I very much prefer Etsy). Go here to see all of the fins I've made: dingpatch fins on SmugMug ------------------------- Dora Hates You |
|
|
|
01/02/2015 05:51 AM
|
|
.
------------------------- Dora Hates You |
|
|
FORUMS
:
For Sale
:
Dingpatch fins for Christmas?
|
Topic Tools
|
FuseTalk Basic Edition - © 1999-2024 FuseTalk Inc. All rights reserved.
First there was Air Jordan .