1. For those times when you want to do some Old School Logging, but you can't get your crank back close enough to her tail. Solid Oak "D". 9.5 inches. Cut-a-way in back gets the trailing edge 3.25 inches closer to the tail. Clear green bead is filled with chopped gun roving. Now, the base had to be thinned down so that it would slide easily in the box! May, or may not, wiggle a little! With a front screw the pin is positioned so that it drops in when the front tab is very close to the front of a 10" box. You can ride with it in a more normal position if you like. $50 + shipping.




2. 10 inch JQ style with an eight point 5 inch base. Woods, from front to back, are: Oak, Cedar, Douglas Fir, Cedar, Brazilian Koa, Cedar, Red Oak. Light blue bead is filled with chopped gun roving. $50 + shipping




3. 10 inch "D" with 8 inch base. "Eclectic" glue up: front is Maple, rear is all kinds. Clear light blue/green bead is filled with chopped gun roving. SOLD




-------------------------
Dora Hates You

Edited: 11/22/2014 at 06:02 AM by dingpatch

.

-------------------------
Dora Hates You

still gots 1 & 2

-------------------------
Dora Hates You